Festool 576922 OF1010EQ Plunge Router Imperial

The newly redesigned and improved OF 1010 R builds upon Festool's compact and lightweight plunge router known for versatility, ergonomics, and visibility. All controls are positioned for one-handed operation.

Ideal for freehand routing, this router now features dual-locking plunge columns for absolute torsional rigidity and better results, and an improved round dust extraction port that accepts D 27 or 36 millimetre hoses.

MICRO-ADJUSTABLE DEPTH CONTROL WITH THREE ADJUSTABLE TURRETS

Precisely set the plunge depth (2-1/8 inch maximum) quickly and effortlessly with the micro-adjust depth stop wheel graduated in 1/10 millimetre (1/256 or 0.0039 inch) increments. Each of the three posts on the turret is also individually adjustable.

EXCELLENT VISIBILITY AND DUST COLLECTION

With a clear dust shroud surrounding the opening in the baseplate, visibility of the bit and work area remains unobscured. Mount the chip catcher underneath the base for impeccable dust collection when routing along an edge. The new round dust extraction port accepts D 27 or 36 millimetre hoses.

RUNS ON GUIDE RAILS

The included Guide Stop and Guide Rods allow the router to run along a guide rail for perfectly straight cuts anywhere.

SPINDLE LOCK

Bit changes are fast and easy with a single wrench, thanks to the spindle lock button and open area between the motor and base.

MMC ELECTRONICS ENHANCE SAFETY AND CONTROL

The tool starts up smoothly, eliminating jolting and voltage spikes. Adjust the speed infinitely within the speed range to suit the material and application, and know that the pre-selected speed will remain constant even when load is applied. Built-in temperature control prevents overheating by switching the tool off when critical temperature is reached in order to prolong its lifespan.

Specification

• 1,010 watts
• 6,500 to 26,000 RPM
• 55 millimetre (2-1/8 inch) plunge stroke
• 8 millimetre (5/16 inch) depth stop fine adjustment range
• 27/36 millimetre (1.1/1.4 inch) inside/outside dust extraction port
• 3 kilograms (6.6 pounds)
• 2 inch maximum cutter diameter
• Compatible with 1/4 inch and 8 millimetre collets

Includes:

• OF 1010 REQ-F-Plus Router with metric scales
• below-table chip catcher
• 1/4 inch collet
• 8 millimetre collet
• 19 millimetre wrench
• 1-3/16 inch guide bushing adapter
• 2x guide rods
• Guide rail adapter
• Plug-it power cable
• Systainer SYS3 M 237 with organizational insert
• 30-Day Money Back Guarantee
• 3-Year Festool Service All-Inclusive Limited Warranty