Saws

The Dozuki was traditionally designed for cutting tenons and specializes in crosscuts for intricate work such as joinery, moldings, and cutting dov...

Steel backed dovetail saw of fine Ger­man work­man­ship. Straight, pol­ished handle, set and sharp­ened.  This comes with a steel backed, 15 tpi bl...

Ryoba saws have teeth on opposite cutting edges. Traditionally, one side is for ripping, the other for crosscutting. The Suizan Ryoba features supe...

Ryoba saws have teeth on opposite cutting edges. Traditionally, one side is for ripping, the other for crosscutting. The Suizan Ryoba features supe...

Designed for precise cutting including dovetails, miters, and tenons Heavy duty screws for secure blade to handle assembly Solid, one piece bi-mat...

This SharpTooth handsaw has a 15"(380mm) blade length and has 9 points per inch. Aggressive 3-sided tooth design cuts wood 50% faster than convent...

This IRWIN® ProTouch™ Coping Saw has a Flat-Bar frame and Dura-Steel™ pins to provide lasting use. The ProTouch handle features an ergonomic triang...

This is a remarkable saw that is capable of cutting a dovetail in 3/4" hardwood with as few as eight strokes. It is also one of the finest cutting,...

Silky’s large, multi-purpose BIGBOY saw is every outdoor worker’s dream. With its 14.2-inch blade and rubber-cushioned, double-fist handle, you’ll ...

Silky Zubat 13" (330mm) Replacement Blade for Hand Saw or Aluminum Pole Saw 13-inch (330 mm) blade length 6.5 teeth per inch (7.5 teeth per 30 mm...

Designed for precise cutting including dovetails, small joints and cutoff Spring-loaded pin allows blade to reverse quickly for left or right cutt...

This professional miter box will handle stock 7 1/4" high, 8" wide at 90°, and 5" wide at 45°. The saw can be set at any angle and has automatic st...

Experience the precision of Japanese craftsmanship with the Woodboy Kataba from Silky Saws. Designed with fine teeth, this saw is perfect for produ...

This Razorsaw® Kataba Crosscut Saw No. 412 from Gyokucho is a general carpentry saw that is well suited for deep cuts in stock 2" and less. The s...

This Razorsaw® Kataba Crosscut Saw No. 437 from Gyokucho is a general carpentry saw that is well suited for deep cuts various stock. The super ha...

The Dozuki was traditionally designed for cutting tenons and specializes in crosscuts for intricate work such as joinery, moldings, and cutting dov...

This brass backed dovetail saw has 15 teeth per inch, cutting a 1.3mm kerf. With an overall length of 250mm, approximately 10″. The walnut handle c...

NAKAYA's "Expert" 180mm series are professional saws that are easy to use, with short blades and gripping rubber handles.   The "Jin" is a single...

Kataba are backless saws with a stiff blade and fast-cutting teeth, well suited for making deep cuts.  It cuts hardwoods, softwoods, particleboard,...

Nakaya RYOBA-type 240mm blade . Taper-ground impulse-hardened blades allow fluid, tear-free straight cuts. To reduce sticking and tarnishing, the...