Laguna MJOIN8012 8" Jointer w/ SHEARTEC II Cutterhead

by Laguna

The Laguna 8" Wedgebed Jointer ShearTec II Cutterhead is the perfect step-up jointer with increased capacity for serious woodworking. The oversized tables provide plenty of support to easily flatten long, wide boards while the large center mounted cast-iron fence allows for maximum stock support when edge jointing. The cast-iron in-feed and out-feed tables feature independent adjustment on dovetail ways.

Laguna ShearTec II heads are all 6 row while most competitors heads offer just 3 or 4 rows. There are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back, and a smoother finish.

The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast and keep the head clean. The inserts are made from thicker solid German carbide and set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.

  • Motor: 1 Ph, 220V, 2 HP TEFC
  • Model Number: MJOIN8012-0130
  • Cutter Head RPM: 5600
  • Cutter Head: 6 Row ShearTec II with four-sided carbide knife inserts
  • Cutter Head Diameter: 3"
  • Adjustment: Wedge-Bed with Crank
  • Max Width: 8"
  • Max Depth: 1/2"
  • Rabbeting Capacity: 1/2"
  • Bed Length: 75"
  • Table Height: 32"
  • Fence Dimensions: 38" L x 4-5/8" H
  • Fence Tilt: 45 degrees, 90 and 45 Positive Stop
  • Built-in wheel system
  • Dust Port: 4"
  • Weight: 510lbs.

You recently viewed

Clear recently viewed